GPS/Iridium -4 Terrestrial Systems

These collars collect GPS positions and transfer the positions and other data through the Iridium satellite system.

Telonics GPS/Iridium collars can be used to remotely obtain location and other data from terrestrial animals anywhere in the world. The collars can include mortality, activity, and temperature sensors; and/or geofencing technology. Users can define GPS, Iridium, VHF, and sensor schedules to best meet their project requirements. Iridium is a two-way system, which allows confirmation of messages received and remote modification of programmed parameters.

Telonics Quick Fix (QFP) can be incorporated into these collars. QFP is Telonics quick fix positioning technology that obtains the data necessary to calculate a GPS position in as little as about 3 seconds. This allows positions to be determined much more quickly and with less energy expenditure than a standard GPS position. Telonics Iridium units can be configured to collect GPS, QFP, or a mix of the two location types. Locations can all be transmitted, or some can be stored but not transmitted.

Models

• TGW-4*70-4 models are the basic GPS/Iridium series
• TGW-4*77-4 models allow for auxiliary schedules and geofencing
• TGW-4*79-4 models allow for auxiliary schedules, geofencing, and inclusion of Salt-water-switch technology
• TGWR-4570-4 and TGWR-4577-4 have user replaceable batteries

Examples of Operational Life

Operational life estimates shown below are calculated using Telonics Product Programmer (TPP), and are provided as examples only, with many other options possible. The estimates provided assume all GPS and/or QFP data is transmitted; battery life can be extended if some of the locations (GPS or QFP) are exclusively stored on board and not transmitted.

Please consult with Telonics for assistance determining what would work best for your application.

Models for Smaller, Down to Approximately Fox-sized, Mammals

Operational life estimates for these small units assume temperatures of 10°C, VHF pulse period of 1500 msec (40 beats per minute), Iridium transmitting weekly (or more as required by data intensity). Average time to GPS fix is assumed to be 75 seconds and average time to QFP fix is assumed as 15 seconds.

Models for Medium to Large Mammals

Operational life estimates for these units assume temperatures of 0°C, VHF pulse period of 1500 msec (40 beats per minute), and Iridium transmitting every other day. These units are typically programmed to have GPS/Iridium/VHF all sharing a battery, and with a smaller battery to provide additional VHF operation following the end of GPS/Iridium life to aid in collar recovery. VHF can alternatively operate exclusively on its own battery, thus extending GPS/Iridium life to that shown as without VHF; in such cases a low intensity VHF schedule would be required to match many of the GPS/Iridium lives. Average time to GPS fix is assumed to be 75 seconds. QFP is typically not used in these larger configurations, though it can be.

Key Features

Features relative to use of Telonics transmitters operating through the Iridium system:

• The Iridium satellite network consists of 66 cross-linked satellites in low earth orbit (LEO), and provides continuous (24/7) coverage world-wide.
• Iridium is a two-way system. The Iridium module on the animal checks for an adequate link prior to data transmission, and data acknowledged as successfully received does not need to be repeated. The two-way link also allows commands to be sent to the Iridium unit while it is deployed on wildlife. Depending on what software and hardware options are selected, this can allow changing between auxiliary schedules, changing other programmed parameters, or remotely triggering a collar-release mechanism.
• With Telonics GPS units, a single Iridium message can contain up to 70-80 GPS positions, or about 10 QFP positions.
• Data is normally retrieved through a third-party data provider. Data rates depend on the amount of data transferred, but are frequently as low as about ~$7.50/unit/month with an Iridium transmission every other day. There is a one-time activation fee of $30 or $40 per transmitter.
• Telonics GPS Iridium units are FCC and IC certified and available for use throughout the United States and Canada with no additional licensing required for the data transfer component.

Other key features:

• In addition to the GPS and Iridium portions of these collars, they typically include a VHF transmitter. The VHF transmitters can be used to locate or monitor the animals from the ground or aircraft, and aid in recovery of a collar at the end of a study.
• The TGW-4270-4 and larger models are fully-hermetically sealed for maximum reliability, with the transmitter, battery, and interconnects sealed into a single metal housing. This is the same technology used by NASA for maintaining high performance electronics in harsh environments. With hermetic packaging, there is no problem with moisture penetration even after years of deployment, except in cases of severe physical damage to the canister. No polymeric packaging offers this level of reliability.
• Telonics CR-5 or CR-7 programmable collar release mechanisms can be added to collars of appropriate size (the CR-5 requires at least a 2-inch wide collar and the CR-7 requires at least a 1.5-inch wide collar). Iridium's two-way link allows remote triggering of either the CR-5 or CR-7 with certain models and when that option is selected at the time of order.
• Users can program or reprogram Telonics GPS/Iridium units through use of Telonics Product Programmer (TPP). TPP can be used to obtain estimates of battery life and data acquisition costs through metOcean telematics under various possible programming scenarios prior to deployment. TPP is also used to send commands to the Iridium unit once it is deployed if desired.
• GPS/QFP collection schedules, Iridium transmission schedules, VHF schedules, and sensor options can all be user-defined. Scheduling can be programmed to change over time (e.g. seasonal changes where monitoring might be more or less intensive at certain times of the year). Some Iridium units (TGW-4X77 series) allow the primary and up to three auxiliary schedules to be programmed, with easy switching between schedules controllable via TPP. TGW-4X77 models also allow users to reprogram the units remotely through Iridium and use of an authorized copy of TPP-GPS software.
• Transmissions can contain a mortality flag (which relates to whether there has been movement detected by an accelerometer within a user-defined period) and a low-voltage flag (which indicates the battery may die soon). Programming and accounts can be set up to receive real-time notification of mortality events via email.
• Activity or temperature data can be collected and transmitted via Iridium, and/or stored on board for downloading if the collar is recovered.
• Data retrieved through the Iridium system, or downloaded from a collar in hand, are processed using Telonics Data Converter (TDC). TDC is used to convert raw data from Telonics transmitters into data reports and to display locations on Google Earth and Google Maps. You can review, save, and edit TDC reports in Microsoft Excel or other spreadsheet programs.
• All positions determined and sensor data collected is stored-on-board the collar, thus if the collar is able to be recovered, stored data can supplement what was transmitted through Iridium.
• A real-time clock and calendar controls all timing functions and is re-synchronized with GPS time to assure high accuracy timing. All timing is programmed using Coordinated Universal Time (UTC).
• When turned off using a magnetic switch, these units consume less than 10 µA; this allows storage for extended periods with minimal impact on operational life.
• Units can be refurbished to their original condition at Telonics.
• Optionally delivers data to EarthRanger, allowing you to map historical and real-time locations online and create a unified view of data from Telonics collars and other sources.
• Optionally delivers data to Movebank, allowing you to map, manage, analyze, and optionally share your data with collaborators or the public.

Optional Geofencing - Show

Telonics TGW-4*77 and TGAV-4*77-4 series GPS/Iridium systems can support geofenced areas. Multiple geofence types are available to define areas of special interest, which may overlap:

• Rectangle - upper left and lower right coordinates are specified.
• Circle - center point and radius are specified.
• Polygon - Up to 50 points may be specified. Polygons may be concave or convex.

The following parameters can be separately defined when the unit is inside and outside the defined geofenced area:

• Acquisition schedule for GPS, QFP-GPS, and any included sensors (e.g. underwater, activity, and temperature)
• VHF Beacon schedule
• Iridium transmission interval, transmission retry delay, and message expiration

A geofence can be described as a virtual boundary around a physical geographical space, defined by a set of coordinates surrounding an area. Geofences may be established and maintained by a range of GPS-enabled devices including smartphones and devices designed for commercial applications like trucking and farming. Geofencing has also proven to be a useful tool for animal tracking studies.

Geofencing allows one or more geographical areas to be defined and provides customized data acquisition and transmission behavior based on whether the study subject is in "inside" or "outside" the geofence(s). A study subject is considered "inside" when inside any defined geofence, and is considered "outside" when outside all defined geofences.

The speed of detecting that an animal has crossed a geofenced boundary depends on how much time has elapsed between crossing the boundary and acquisition of the next GPS position. Therefore, the rate at which fix attempts are scheduled directly influences the time it will take the unit to detect boundary transitions. QFP-GPS data do not provide a resolved position until post processing has occurred, so QFP-GPS data cannot contribute to the detection of boundary transitions.

Optional Auxiliary Schedule Sets

With Telonics TGW-4*77-4 and TGAV-4*77 series GPS/Iridium systems, up to 3 Auxiliary schedule sets can be defined. Auxiliary schedules are useful for increasing or decreasing the intensity of data collection and/or data transmission. Auxiliary schedules are also useful for adjusting the VHF beacon duty cycle to save energy when there are no plans to be out in the field monitoring units with a VHF receiver. Auxiliary schedules can provide the following options to the primary schedule:

• Alternate schedules for collection of GPS, QFP-GPS, underwater, activity, and/or temperature data
• Alternate VHF Beacon transmission periods
• Alternate Iridium transmission interval, transmission retry delay, and message expiration

GPS/Iridium systems can be directed to execute an Auxiliary schedule (or return to the primary schedule) by sending commands over the Iridium data link.

Commands to GPS/Iridium systems are sent via email using Telonics Product Programmer (TPP). Internet connectivity and an email provider are required.

After receiving a schedule change command, GPS/Iridium systems will switch to the specified schedule immediately and will continue to execute that schedule until otherwise commanded. Sent commands are received by the fielded unit at the time of a scheduled Iridium transmission, or units can be programmed to check for messages more frequently by defining a "command check interval" which is shorter than the Iridium transmission interval.

Electronic Specifications

µGPSI-25 GPS/Iridium/VHF Specifications - Show

Notice to United States Users

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesirable operation.

The user is cautioned that changes or modifications not expressly approved by Telonics could void the user's authority to operate the equipment.

This device contains FCC ID: Q639603N

To satisfy FCC RF Exposure requirements for mobile and base station transmission devices, a separation distance of 20cm or more should be maintained between the antenna of this device and persons during operation. To ensure compliance, operation at closer than this distance is not recommended.

Notice to Canadian Users

Under Industry Canada regulations, this radio transmitter may only operate using the antenna integrated into the device.

This device complies with Industry Canada license-exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device.

This device contains IC ID: 4629A-9603N

Photo Gallery

TGW-4*70-4 versions are shown, with TGW-4*77-4 versions similar with additional programming options. Various collar and casting options are shown, with such specifications user-definable at the time of order.

Manual

• Gen 4 GPS User's Manual

Related Products

Legacy Products

This information on discontinued products is provided for individuals who are still using these older systems. Product descriptions may be time sensitive or even outdated. Please contact Telonics if you have questions.

Telonics supports these products as possible based on availability of parts, software, or other considerations; but no longer sells them new.

• TGW-4x7x-3 Series
  • Systems with Geofencing and Auxillary Schedules:
    TGW-4577-3, TGW-4577B-3, TGW-4578-3, TGW-4578B-3, TGW-4677-3, TGW-4677B-3, TGW-4678-3, TGW-4678B-3
  • Systems without Geofencing and Auxillary Schedules:
    TGW-4570-3, TGW-4570B-3, TGW-4670-3, TGW-4670B-3

Lithium Battery Shipping Regulations

Telonics Inc. ships all systems containing lithium batteries in accordance with the US Department of Transportation rules for hazardous materials set forth in 49CFR and the IATA Dangerous Goods Regulations.

Shipping dangerous goods can be complicated and confusing, consult a dangerous goods specialist if needed. The general requirements for shipping lithium batteries according to 49CFR are located in Part 173, Subpart 173.185 in the link below.
http://www.ecfr.gov/cgi-bin/text-idx?SID=e8334217c2c8d081457a5156872ad037&tpl=/ecfrbrowse/Title49/49cfrv2_02.tpl#0

Service Commitment

Since 1970, Telonics has built a reputation based on product quality, product support, service, and customer satisfaction. Telonics strives to produce the highest quality products, and to support those products accordingly.

Because of extreme conditions and the unpredictable nature associated with most telemetry applications, problems occasionally arise. Most problems can be resolved quickly. In all cases, we hope to be able to work in partnership with users to resolve problems to the user's satisfaction and to uphold our demonstrated commitment to excellence. If problems should arise, all products must be returned to our factory for failure analysis.

Warranty: GEN 4 GPS Systems - Show